Techgrasp Technology

Here are some more information for Kit Need:

Body kits materials – Carbon fiber

Body kits enhance the style of your car. Some components also enhance the aerodynamics of the car. Being essentially added on to your car, body kits need to be quite light. Otherwise your car weight will go up and that would adversely impact your car’s performance. Therefore the material of which body kits are made needs to be light.

Body kits also have elegant and stylish shapes with a glossy surface finish. The shapes are very elaborate and full of curves. So their material of construction should be such that it can be fashioned into complex shapes.

Body kits are mounted on the exterior of your car. When the car is cruising it experiences considerable aerodynamic forces. Body kits need to be able to withstand these large forces. Under high performance driving conditions the aerodynamic forces are very large. Body kits have to be able to resist even these very large forces. Therefore the material of construction needs to be very strong.

It is not easy to find these three properties, that is, lightness, ability to make complex shapes and strength in a single material. However carbon fiber is one of the best materials if these are the properties you are looking for. It is very light, can be molded into complex shapes and is very strong.

Carbon fiber as used in everyday language is short for carbon fiber reinforced polymer. It is essentially carbon fibers (sometimes called graphite fibers) held together by a polymer. The most common polymer is an epoxy polymer. Though individually neither carbon fibers nor the polymer have the desired properties, in combination they are very, light, strong and complex shapes can be made using them. Since it is made of two distinct materials it is called a composite material.

Carbon fibers initially found application in the aerospace industry where a light and strong material is very important. Aerospace being a highly research oriented industry there has been a lot of research done on carbon fiber products and the products we now see benefit from the refinement.

Carbon fiber products are lighter and usually more expensive compared to fiberglass products. If you choose to buy carbon fiber body kits you are buying some of the most high tech products available. You can find more information on body kits at www.ilovebodykits.com

About the Author

Louie Liu has been in the car aftermarket products industry for 5years. He has specialized in body kits, headlights, cold air intakes and other aftermarket products. He has deep knowledge of a wide range of products including knowledge of benefits of body kits and other products, product options and how to choose a car aftermarket product. You can learn about a wide range of body kits and other car aftermarket products at his site www.ilovebodykits.com.

Do you need to get a camber kit if you have installed Ground Control suspension.?

I have just put Ground Control coil overs on a Honda Accord. Do I need a camber kit?

It'll really depend on how much you're going to lower the car, or God forbid, raise the car and put huge rims on it.

Go get the car corner balanced and aligned. If you can't get the camber you want, ask the alignment guy if a camber kit will help and see if he'll give you a discount for the realignment if you need to install a camber kit.

Of course, if you're planning to track your car, being able to easily adjust your camber in the pits is a huge plus.

Kit Siang: NEM recycles Dr M’s failed plan
By Asrul Hadi Abdullah Sani KUALA LUMPUR, April 7 — The DAP parliamentary leader Lim Kit Siang today said that the New Economic Model (NEM) is a recycled by-product of former Prime Minister Tun Dr Mahathir Mohamad’s Knowledge-based Economy Master Plan. Lim said that country would have achieved its high income status if the government had followed the K-economy concept. “We now have the NEM ...

Thanks for visiting!